Classic Car Gallery

Tuesday, May 12, 2009

The Ferrari 250 GTE


When most people talk about Ferrari they think about and discuss either the single passenger pure race cars or the two passenger sports racing or the two passenger road cars. Very little is ever mentioned about the four passenger cars.

Ferrari decided to build a four passenger car so that the company could get into additional markets. However, one of the decisions he made was that it had to have two rather than four doors. To date, as far as I can tell, the factory has never produced a four door model for the general buyer.

The challenge faced by the company was to make a four passenger car on their current two seat chassis. In later years they were faced with the same problem, and they came up with the 308 GT/4, not a particularly popular car.

In 1960 they solved the problem with the 250 GTE 2+2. Was it successful? Well about 950 of them were made, which makes it the top seller in the 250 series.

The designation of 250 GTE 2+2 as the model number was based on several factors. First the 250 represented in cubic centimeters the cylinder size of one of the V12 cylinders. The GT was for Grand Touring and the E was from the 508E, a new chassis design. The 2+2 meant that the front two passengers found a normal sized area up front, and the +2 meant that two could sit in the rear. For this car the two rear seat passengers had adequate but not spacious room. Many other brands have used the 2+2 designation, but in the majority of cases, the rear area had no leg room. It was more of a marketing ploy to satisfy some government regulations about the need for larger capacity cars.

The 250 GTE 2+2 was rated at 235bhp, slightly lower than the typical 250 series car. It had an unusual gear box with four speeds and an electric overdrive. Disc brakes were fitted all around. The top speed was listed as 136mph, again lower than other 250 series models. However, keep in mind that this particular car was designed as a road car and not a sports racing automobile. Other significant factors were a generous boot to hold luggage, and improved heating and ventilation for the passenger's comfort.

While an outstanding handling car and a great touring car, the 2+2 does not rival the other 250's when it comes to the used car marketplace. It has been typical of Ferrari 2+2's that the original prices are higher than the companion two seat versions, they depreciate much faster and are less sought after by collectors. A 1961 model with 34,000 miles was recently advertised in England for $134,000. Still a lot of money for a used car, but nothing like what other Ferrari collector cars would bring.

Dennis Dater has been involved with cars for over 50 years. His first love was sports cars when he drove a 1952 MG to high school. He has produced over 40 articles for EzineArticles on cars, and almost a hundred on his web sites. His two web sites are designed for Honda Accord aftermarket accessories. Please visit him at:
http://www.accordmania.com

Article Source: http://EzineArticles.com/?expert=Dennis_Dater

Monday, May 11, 2009

The Ferrari 212


The Ferrari 212 Inter was produced from 1951 through 1953. About 80 cars were built during this time period. Typical of early cars, the factory designed and built a chassis with full engine and running gears and the buyer was able to commission a different company to build the body. This is why many early Ferrari cars carry the same model number but do not look alike.

Typical for Ferrari the 212 designated the cubic centimeters of one cylinder of the engine. So the V12 engine for this automobile was 212cc x 12 or around 2,544 cc. The actual value was 2,562 cc as values for model numbers were rounded up or down at the factory's discretion.

The basic engine was the same design as the earlier 166 Inter, however it had been bored out to increase the horsepower to 150 with two carburetors. Cars towards the end of the series received three carburetors and were rated at about 170bph. As in earlier cars the Inter models were not designed for racing, but raced they were. If you wanted one specifically for racing you chose the 212 Export model.

These cars were bodied in coupe, cabriolet and spider designs by some of the leading companies such as, Vignale, Ghia and Pinin Farina (who changed their name to Pininfarina years later). The chassis was tubular steel, a practice that you could see on cars produced through the 1980's. The transmission was a five speed manual, again a design that lasted until 1994 when a six speed manual was introduced.

Are these models very valuable? Well at a December 2008 auction a Ferrari 212 Export (remember the model designed for racing) was bid up to $1,946,000 and not sold as the reserve had not been met.

Dennis Dater has been interested in cars since he learned to drive in a 1952 MG TD. He has two unique web sites that offer Honda Accord aftermarket parts. Visit him and see the products or read more articles.

http://www.accordmania.com for Accord performance products
http://www.accordtopia.com for Accord appearance products

Article Source: http://EzineArticles.com/?expert=Dennis_Dater